February 16, 2018 | Posted in:Hard Water

For homeowners in the Central Texas area, having hard water in your home is almost a certainty without intervention. Hard water can cause all kinds of havoc in a home, including damaging appliances, leaving stains on dishes and clothing, and building up mineral deposits in faucets and shower heads. Below are a few suggested ways to limit or repair the issues caused by hard water.

Vinegar

The first solution is to use vinegar. This is because vinegar can help to loosen some of the mineral deposits. This means that it can get out of the stains on the bath mats, chrome faucets, shower heads, and coffee pots. You can also use the vinegar inside of your dishwasher and washing machine by just running a cycle with nothing in it. It might help to remove stains and disinfect if you spray the surface of the shower doors, sinks, and toilets with the vinegar. All you will have to do is to wipe down these surfaces and if the stain is very bad, you might have to scrub it a little bit.

Baking Soda

The second solution is to use baking soda. This is one of the best things that you can use when you have a lot of hard water buildup that is just not going away. This is because it is going to be a little more abrasive to all of those stains. All you have to do is to sprinkle the baking soda on the stain so that it can sit for a few minutes and then scrub it with a scrub brush in order to remove the stain. This is going to work best if you have already used vinegar on the stain. After applying the baking soda, you’ll need to add water. Water will cause the baking soda to become a paste that you can quickly wipe up, leaving a cleaner space.

Cleaners with Chemicals

There are a lot of chemical cleaners that you can use that will help you to remove the mineral stains and hard water buildup in homes. You will need to need to pick a cleaner that has acids in it like phophoric, hydrochloric, or hydroxyacetic acids. You are going to need to be very cautious about the more abrasive cleaners and brushes that can scratch the surface of the fixtures. It is important to follow the instructions of the manufacturer to make sure that you are using the cleaners properly. For some cleaners, protective gloves should also be worn.

Colored Stains from Hardwater

If you have a red or reddish brown stain from iron, then you might consider using cream of tartar and water. This is going to create a paste that you can let dry and rinse off, leaving a cleaner surface. If you have a brown or black stain from manganese in your water, then you can make a paste of cream of tartar and hydrogen peroxide. Lastly, if you noticed a green or blue stain from copper or water that has a lot of acid in it, you can use a mixture of soap suds and ammonia to lighten it. Just let the mixture dry and then rinse it off.

Salt-Free Water Conditioner

For a more permanent solution, consider having a water softener installed in your home. A water softener greatly lessens the impact of hard water on your home and appliances, and many of these devices are made to last for years. Another option to consider is a water conditioner, which has a slightly different process than a water softener, but which still solves your hard water issues. Many homeowners turn to salt-free water conditioners because they require very little maintenance and are built to last you and your family for years.

If you would like more information about dealing with hard water, or about installing a salt-free water conditioner, contact Clear Water of San Marcos, located in San Marcos, TX.